澳门新萄京,澳门新萄京客户端下载

Home|Sinopec Corp|Site Map|CN
3D Printing Suppliers
?PLA Series Materials
No. Product Main Parameter Main Characteristic Factory
1 PLA materials MFR 2.0~5.0g/10min
Density 1.1~1.3g/cm3
HRC ≥100R
Wire diameter 1.75±0.05mm
The advantages of this material are stable discharge, less fibre drawing in hollow parts, smooth surface, high interlayer bonding force, etc. Yanshan
2 Photochromic materials MFR 2.0~5.0g/10min
Density 1.1~1.3g/cm3
HRC ≥100R
Wire diameter 1.75±0.05mm
Color of this material can be changed from one into another under UV light
3 Thermochromic materials MFR 2.0~5.0g/10min
Density 1.1~1.3g/cm3
HRC ≥100R
Wire diameter 1.75±0.05mm
This material can show one color below 35℃ and another color above 35℃
4 Wood- Plastic Composites
(WPC)
MFR 7.0~9.0g/10min
Wire diameter 1.75±0.05mm
1.This material has a sense of wood texture
2.Distinct woody fragrance can be smelt when printing
5 Gradient color materials MFR 2.0~5.0g/10min
Density 1.1~1.3g/cm3
HRC ≥100R
Wire diameter 1.75±0.05mm
This material has different color ranges, the printed models are colorful

?Other Materials
No. Product Main Parameter Main Characteristic Factory
1 ABS materials MFR 2.0~3.0g/10min
Density 1.05~1.06g/cm3
HRC ≥100R
Load deformation temperature
≥ 80℃
Moulding shrinkage ≤0.8%
Wire diameter 1.75±0.05mm
1.The features of the product are easy processing, low ash, high strength, high toughness, excellent surface gloss
2.Problems like warping and stress-cracking will not happen during printing
Yanshan
2 Elastomer materials MFR 10~20g/10min
HRC ≤ 80R
Wire diameter 1.75±0.05mm
The product has long elasticity, which can be applied in printing soft models Yanshan
3 Water soluble supporting materials Vicat softening temperature ≥ 40℃
Wire diameter 1.75±0.05mm
As supporting materials, they are applied in 3D printing models by FDM (Fused Deposition Modeling) method Yanshan

?Portable Low Temperature Painting Pens and Low Temperature Materials
No. Product Main Parameter Main Characteristic Main Application Certification Factory
1 Portable low temperature painting pens Printing temperature ≤ 80℃
Pen point temperature ≤ 45℃
Working voltage 3.6V
Maximum current 1A
Spray nozzle diameter 0.7mm
Lithium battery of pen can maintain 2 hours continuous painting after charged, which can be recharged 4000 cycles. The printing temperature and the pen point temperature are both low, which can protect users from scald. It can be applied to cultural creativity and education fields. It can inspire children’s creativity, designable, constructive abilities, and strengthen understanding of space, open a door to 3D creativity for children. It can also bring source of originality for designers and modelers. CE, EMC, ROSH, En60711 Yanshan
2 Low temperature materials Melting temperature ≤70℃
Wire diameter 1.75±0.05mm
This material is soft with high plasticity, and can be bonded, jointed and quadratic molded. It is safe and smells no any odor, and gets approval of food certification. It is served as cartridge of portable painting pens. SVHC, MSDS
XML 地图 | Sitemap 地图